As a TCP/IP based PC/CAN interface for standard Windows applications the
CAN@net II/VCI is the best choice. It offers with the Ixxat standard Windows
driver interface VCI an easy to handle and wide functional interface for Windows
applications. The Ixxat tools also use this standard driver interface.
The CAN@net II/Generic offers with a generic ASCII interface via TCP/IP the
possibility to use the device in non-Windows systems such as Linux operating
systems. Additionally, two CAN@net II/Generic devices can be used as a
bridge. This makes it possible to connect two CAN networks which are far away
from each other via TCP/IP. The CAN@net II/Generic devices receive the CAN
messages of their CAN network and transmit them via TCP/IP to the other
CAN@net II/Generic device. Filters can be set on configuration of the bridge, so
only messages which are interesting for the other network are exchanged.
For the different CAN@net II versions, specific manuals are available. This
manual describes the software installation and the programming and integration
of the devices into customer applications.
• power supply range +9 V to +32 V DC
• Freescale 32 Bit microcontroller with 150 MHz clock
• 8 MByte DRAM
• 4 MByte flash
• 1 CAN Controller PHILIPS SJA1000 with 16 MHz clock
• CAN bus interface according to ISO 11898-2, galvanically isolated
• Ethernet PHY with Auto Crossover
• 10BASE-T/100BASE-TX Ethernet